Naija Talk community (www.9jatc.com)
As a guest you have limited access to the site. Register now to have full access to the site.
Naija Talk community (www.9jatc.com)

Discussion concerning hacking is prohibited from the site.
 
HomeFAQSearchMemberlistRegisterUsergroupsLog in
check your 2013 Jamb below
Share | 
 

 How to browse the internet with any decoder at 5MB per second free

View previous topic View next topic Go down 
Go to page : Previous  1, 2, 3, 4, 5, 6, 7, 8  Next
AuthorMessage
Ashawo
Senior
Senior


Posts: 1276

PostSubject: How to browse the internet with any decoder at 5MB per second free   29/04/11, 07:58 am

First topic message reminder :

Connection Requirements and
Overview
Connection Requirements
SPLITTER
LINKSYS CABLE MODEM
RJ – 45 NIC Cable
Ethernet Cable
Router(WIRELESS OR WIRED if
you intend to use more than
one pc)
DECODER(mytv, hitv, dstv,
daarsat etc)
Coaxial to RJ-45 converter or
adapter
COAXIAL CABLES
Overview
SPLITTER
There are many types of
Satellite Decoder Splitter, you
buy your favorite at the shops
where it ’s been sold What do
we use the Splitter for? This
enables you to create a parallel
connection for the coaxial
cable (this is the cable that is
used to connect your decoder
to the TV and as well as the
decoder to the Dish hanged
outside).the splitter will share
the signal that comes from the
dish outside between the TV
and the Router cable modem,
which will convert the signal to
an internet signal
LINKSYS CABLE MODEM
Definition of a Cable Modem: A
cable modem is a device that
delivers high-speed Internet
connectivity via a cable
television company which
serves as the Internet service
provider (ISP). A cable modem
requires a subscription to
cable Internet service, and will
not function by simply
connecting it to a cable TV
(CATV) feed. Externally, a cable
modem resembles a DSL
modem. The coax cable that
brings in the digital CATV
signal provides a channel for
upstream and downstream
Internet service. This does not
interfere with television, as
there is plenty of "real estate"
or bandwidth space on the
coax cable to handle both TV
and Internet signals. Why
Linksys Cable Modem: The
Linksys Cable Modem does not
require you to pay any
additional separate monthly
subscription to the cable
company, you only need to
connect it with your current
subscription with your satellite
cable TV provider which will
only work with a Coaxial Cable.
RJ – 45 NIC Cable
This is a typical networking
cable which we will use to
network all the network
devices that we have listed
above such as the Router
(Cable Modem), we will use it
to make a connection from the
Router to the computer to
transmit internet.
Ethernet Cable
Ethernet cables connect
network devices such as
modems, routers, and
adapters. They transmit data
using the Ethernet protocol.
Most Ethernet cables have
RJ-45 jacks on both ends, each
with 8 pins. (They look similar
to telephone jacks, which use
4 pins or 6 pins.)
• Equipment using an Ethernet
cable is referred to as wired.
• Wireless equipment uses
radio waves in place of some
(or all) Ethernet cables. A
network device that uses both
Ethernet and wireless
connections is usually called
just wireless.
The Physical Ethernet Cables
• Use Cat 5 cables. (Cat 5 is a
measure of quality, meaning
that it supports traffic up to
100 MB / sec.) These are also
called 10/100 Base-T Cat 5
cables.
• Some Ethernet cable wires
crises-cross internally, others
are straight through, meaning
that pin 1 is wired to pin 1 on
the other end, etc. A port
(socket) for a straight through
Ethernet cable is sometimes
called an uplink port. If you
aren't sure about a cable, and
you can see the inside wires'
colors, hold the two ends of
the plugs up, so the same side
of the plug is facing you.
Router
A router is used to transmit
internet to more than 1
computer system on a
network setup, this enables
you to network your
connection to other system
(PCs). This is also known as
cable modem.
The connection runs the
incoming cable connection to
an external cable modem,
which has an Ethernet
connection to a router, which
then connects
DECODER
A decoder is a device which is
used to decode the satellite
signal receive from the satellite
dish into a video, the decoded
signal converted into video is
what we receive on our TV,
The purpose of we connecting
to the internet with a decoder
is to convert your decoder to a
Modem, a cable decoders is a
modem because it modulates
and demodulates, but it also
functions as a tuner, a
network bridge, an encryptor
etc.
To connect your PC or laptop
to a decoder to access the net,
you do not use a serial port as
with dialup modem.
COAXIAL CABLES
This connect the decoder to
the splitter and one end of the
cable goes into the TV while
the other end goes to the WAN
port of the router (Linksys
Router)
Things to take Note before
buying all the equipments
required for setup:
• I always recommend
running a router between a
cable modem and a PC because
a router not only allows more
than one PC to be connected,
but also provides a robust
hardware firewall that helps
shield your PC(s) connected to
it from internet – based
attacks.
• You can directly connect PCs
to a cable decoder using USB; I
do not recommend that option
because it precludes using a
router (cable modem)
• Some cable modems have a
built – in router, in which case
you don’t need to purchase a
separate one. If your computer
doesn ’t include an Ethernet
adapter built into the
motherboard or a separate
Ethernet card, you can install
an Ethernet card into an
available internal expansion
slot or use a USB – based
Ethernet adapter instead. I use
a USB - based Ethernet adapter
on my HITV decoder.
• The cable modem connects
to the CATV network using the
same coaxial cable connection
as your cable TV.
The steps to Connection
The steps to Connection
Step 1
Coaxial Cable cord
SplitterPort
Connect the coaxial cable from
your dish to your satellite
decoder splitter( i.e the “in” part)
and then connect one cable from
the first “out” port to your
decoder and the one from the
second port to your Linksys
modem; the cable can be
purchased from any shop where
they sell cable
decoder while one of the other
coaxial cable cords is connected
to your television to watch
satellite stations.
Step 2
Coaxial Cable cord
LINKSYS ROUTER
Connect the second Coaxial cable
cord from the splitter to WAN
port of your router (Linksys
Router)
Step 3
Coaxial Cable cord
If your cable modem does not
have an inbuilt router facility, you
will need to connect your cable
Modem to the CATV network of
your router using the same
coaxial cable connection as your
TV, but might need to convert it
Step 4
Ethernet Cable
LINKSYS ROUTER
Connect the Ethernet Cable from
the router to your computer
system, which can stand as a
client if you are using only one
computer or server if you are
networking more than one
system, make sure that your
computer has an inbuilt Ethernet
adapter on the Motherboard or a
separate Ethernet card, you can
also install an Ethernet Card into
an available internal expansion
slot or you can alternatively use a
USB – Based Ethernet Adapter
instead. In our connection we
use a USB –based Ethernet
adapter on HITV Decoder
Step 5
LINKSYS ROUTER
RJ -45 Cable
At the back of the Linksys Router
there are several ports, port 1 – 4
Stand as the LAN(Local Area
Network) Port which can be used
to connect 1 -4 CPU to the router
with an RJ -45NIC Cable, in most
cases the cables comes with the
router when you purchase it.
Connect 1 -4 CPU to the LAN Port
of the router with your RJ -45
Cables, please don ’t mistake it
with the Ethernet cable, as is only
to be used to connect the
computer which is the server to
the Router for network routing
and also note that each of the
CPU that connect to the Router
LAN Port with the help of RJ-45
must have an inbuilt Network
card install in them, while the
server should have an Ethernet
card adapter install on the board
as mentioned earlier.
Step 6
The fifth port of the Linksys
Router which stand as the WAN
Port (Wireless Access Network)
Connect the second coaxial cable
that comes from the splitter to
the WAN Port of the Router, but
note that you need a converter
which is an adapter that convert
the coaxial cable to RJ -45 cable
since the Router WAN port does
not have a direct port for a
coaxial cable
Step 7
The sixth port of the Linksys
Router which is called the
UplinkPort, the port can be
connected to a Hub or a Switch
to enable additional users or
computers within the network
range to share with the internet
of your decoder via wireless
access
System Configuration Steps
1. Start up your computer that
we call the server, and click on
the start button and then click on
control panel
2. Click on Network connection
from the control panel tab
3. Click on Create a new Network
connection from the Network
Connection from the control
panel tab
4. Select the Connect to the
Internet Radio button and then
click on Next button
5. Select the Choose from the a
list of Internet Service providers
[ISPs] radio button and click on
Next button
6. Finally Click on Finish button,
Then the connection will then
come up
7. Open up your Internet
Browser and start browsing
Browsers Compatibility
(1) Internet Explorer
(2) Google Chrome
(3) Opera
(4) Firefox
And much more
Operating System Compatibility
(1) Windows Operating System
(2) Linux Operating System
What can this Internet
Technology be used for? (1)
Personal Usage
(2) Group Usage in an
Organization or Company
(3) Cyber Café
(4) BusinessCenter for Email
Service and Internet Calls
Benefits of using this Technology
(1) Pay only monthly subscription
for your cable TV and it covers
the Internet Bill (2) Browse with
a very fast internet speed of 4
mbs download speed
(3) Connect large number of
Computer systems with the help
of a Network devices
(4) Connection configuration is
simple and easy
(5) You can watch Cable TV while
browsing the internet at the
same time without conflict
(6) No downtime for internet
connection except if your
subscription as elapsed, or one
of the connection devices gets
faulty.
(7) You can buy two decoders to
setup a mini cyber café and cable
TV football center at the same
time
Back to top Go down
View user profile

AuthorMessage
carbo
Amateur
Amateur


Posts: 399
Location: www

PostSubject: Re: How to browse the internet with any decoder at 5MB per second free   22/07/11, 10:27 pm

prettyddd wrote:
I have aquick question JB, is the Splitter the same as the Diseqc?



yes its just like it
Back to top Go down
View user profile
abou1
Senior
Senior


Posts: 1234
Location: naija

PostSubject: Re: How to browse the internet with any decoder at 5MB per second free   23/07/11, 12:30 am

prettyddd wrote:
3 people have confirmed but i dont really know for myself how they got it cos there are other hardware accessories needed.
can u verify how they go about it.
Back to top Go down
View user profile http://alanengservices.webs.com
Abdullahi
Senior
Senior


Posts: 710

PostSubject: Re: How to browse the internet with any decoder at 5MB per second free   23/07/11, 07:06 am

Hmn
Back to top Go down
View user profile
abou1
Senior
Senior


Posts: 1234
Location: naija

PostSubject: Re: How to browse the internet with any decoder at 5MB per second free   23/07/11, 10:21 am

Abdullahi wrote:
Hmn
is this a way to increase numbas of post.
Back to top Go down
View user profile http://alanengservices.webs.com
Drdanskills
Senior
Senior


Posts: 1203
Location: Benin City

PostSubject: Re: How to browse the internet with any decoder at 5MB per second free   27/08/11, 06:24 pm

Just tested dis stuff in an old-friends place and men d speed is quite impressive. Guys u need to check it out!
Back to top Go down
View user profile http://drdanskills@yahoo.com Online
prettyddd
Novice
Novice


Posts: 64
Location: KITCHEN

PostSubject: Re: How to browse the internet with any decoder at 5MB per second free   27/08/11, 11:23 pm

Drdanskills wrote:
Just tested dis stuff in an old-friends place and men d speed is quite impressive. Guys u need to check it out!


Can he share with you where exactly he got the coaxial cable and the converter for the RJ45 please? Its about time things were really experimented and not just read in this forum.
Back to top Go down
View user profile
bellokingson
Amateur
Amateur


Posts: 100
Location: WEST AFRICA

PostSubject: Re: How to browse the internet with any decoder at 5MB per second free   27/08/11, 11:45 pm

Let us Know more about it,is it possible? what are the accessory? abd besides how are we goin to proceed
Back to top Go down
View user profile
newton
Novice
Novice


Posts: 31

PostSubject: Re: How to browse the internet with any decoder at 5MB per second free   28/08/11, 03:41 pm

@thread owner, plz how much will all these expenses cost us.
thks
Back to top Go down
View user profile
Drdanskills
Senior
Senior


Posts: 1203
Location: Benin City

PostSubject: Re: How to browse the internet with any decoder at 5MB per second free   28/08/11, 04:48 pm

@ All, u can get ur materials cheap @ computer village Ikeja.
Motorola surfboard cable modem goes for btw 15-25k, D RJ-45 cable is about 3.5k, d rest is just peanuts. Coaxial cable is dsame with d normal satellite cable we all use naw!
It all depends on ur bargaining power, so bargain wella.
Back to top Go down
View user profile http://drdanskills@yahoo.com Online
Drdanskills
Senior
Senior


Posts: 1203
Location: Benin City

PostSubject: Re: How to browse the internet with any decoder at 5MB per second free   28/08/11, 04:52 pm

If u want to supply other members of ur family or nearby neighbours, u'll definately need a wireless router, u can get Linkserve router. Am not too sure of d current price but is around 9k.
Back to top Go down
View user profile http://drdanskills@yahoo.com Online
evanvick
Novice
Novice


Posts: 6

PostSubject: Re: How to browse the internet with any decoder at 5MB per second free   29/08/11, 06:09 pm

drdanskills, if you have tested the stuff pm your phone nos to me. [You must be registered and logged in to see this link.]
Back to top Go down
View user profile
Drdanskills
Senior
Senior


Posts: 1203
Location: Benin City

PostSubject: Re: How to browse the internet with any decoder at 5MB per second free   29/08/11, 07:04 pm

No dropping of mails, private messaging is always available.
Back to top Go down
View user profile http://drdanskills@yahoo.com Online
helen009
Novice
Novice


Posts: 5

PostSubject: MTN,AIRTEL,ETISALAT AND GLO FREE BROWSING ON COMPUTER   31/08/11, 10:09 pm

MTN,AIRTEL,EISALAT AND GLO FREE BROWSING ON COMPUTER

for your information, the latest mtn and zain free browsing software is called pingfu udp iris tunnel, it’s a mass firewall breaker. it’s far better than your-freedom software that cuts every 1 hour. unlike jondo, psiphon and your-freedom software that is not very fast. Pingfu software delivers 24 hours free internet service to mtn and zain users without any interruption and the speed is incomparable with any other free browsing software ever seen.
here are the qualities of this network service breaker software:

-it has a speed of 560 kbps to 1.7 mbps
-contains multi-cgi relay
-server autoswitch killer
-a dns protocol behind 3 servers
-custom loophole sequence
-plung in out lagging
-multiple streaming rate
-24 hours continues free internet service

Infact, this software is the best. if you really wants to enjoy free browsing on your computer, then call me on 08039526298 to get the full VERSION of this high speed free internet software call pingfu udp and enjoy your computer. you can also get free dstv on computer from me and with multiple streaming rate quality carried by this pingfu software, you can be able to watch your dstv clear when you put in the right settings that will crack the dstv software and it won’t ask of smart card number and recharge pin anymore, you will now enjoy the whole dstv channels on computer and browse free of charge. call me now on 08039526298
Back to top Go down
View user profile
newton
Novice
Novice


Posts: 31

PostSubject: Re: How to browse the internet with any decoder at 5MB per second free   31/08/11, 10:35 pm

helen009 wrote:
MTN,AIRTEL,EISALAT AND GLO FREE BROWSING ON COMPUTER

for your information, the latest mtn and zain free browsing software is called pingfu udp iris tunnel, it’s a mass firewall breaker. it’s far better than your-freedom software that cuts every 1 hour. unlike jondo, psiphon and your-freedom software that is not very fast. Pingfu software delivers 24 hours free internet service to mtn and zain users without any interruption and the speed is incomparable with any other free browsing software ever seen.
here are the qualities of this network service breaker software:

-it has a speed of 560 kbps to 1.7 mbps
-contains multi-cgi relay
-server autoswitch killer
-a dns protocol behind 3 servers
-custom loophole sequence
-plung in out lagging
-multiple streaming rate
-24 hours continues free internet service

Infact, this software is the best. if you really wants to enjoy free browsing on your computer, then call me on 08039526298 to get the full VERSION of this high speed free internet software call pingfu udp and enjoy your computer. you can also get free dstv on computer from me and with multiple streaming rate quality carried by this pingfu software, you can be able to watch your dstv clear when you put in the right settings that will crack the dstv software and it won’t ask of smart card number and recharge pin anymore, you will now enjoy the whole dstv channels on computer and browse free of charge. call me now on 08039526298


infact you are a big thief.
Back to top Go down
View user profile
Guest
Guest



PostSubject: Re: How to browse the internet with any decoder at 5MB per second free   01/09/11, 06:46 am

I BOGHT MOTOROLA WIRELESS CABLE MODEM BUT IT IS NOT WORKING WITH MY STRONG DECODER; AND THEY SAID THAT I HAV TO UNLOCK IT FIRST.. PLS HELP WIL IT ONLY WORK WITH ONLY DSTV,HITV,MYTV DECODER ALONE?. PLS HELP
Back to top Go down
Starpryde
Novice
Novice


Posts: 77

PostSubject: Re: How to browse the internet with any decoder at 5MB per second free   01/09/11, 08:08 am

Pls I need to get a clear view of this stuff. Pic can help here.
Back to top Go down
View user profile
Drdanskills
Senior
Senior


Posts: 1203
Location: Benin City

PostSubject: Re: How to browse the internet with any decoder at 5MB per second free   01/09/11, 08:13 am

skynetz wrote:
I BOGHT MOTOROLA WIRELESS CABLE MODEM BUT IT IS NOT WORKING WITH MY STRONG DECODER; AND THEY SAID THAT I HAV TO UNLOCK IT FIRST.. PLS HELP WIL IT ONLY WORK WITH ONLY DSTV,HITV,MYTV DECODER ALONE?. PLS HELP


If u did accordingly, it should work. I hope u ve a valid subscription? Cos without dat it won't work!
Back to top Go down
View user profile http://drdanskills@yahoo.com Online
Drdanskills
Senior
Senior


Posts: 1203
Location: Benin City

PostSubject: Re: How to browse the internet with any decoder at 5MB per second free   01/09/11, 08:15 am

@Helen009, we don't operate like dat here. Whatever beneficial info u ve u drop willingly!
Back to top Go down
View user profile http://drdanskills@yahoo.com Online
emma.autotech
Novice
Novice


Posts: 1

PostSubject: Re: How to browse the internet with any decoder at 5MB per second free   10/09/11, 07:08 pm

[i]i am new here and heard one can use strong decoder 4669z connect to internet watch all dstv free but then the decoded had been run with cut sharing sort of but i need someone to help me with practically .
Back to top Go down
View user profile
Guest
Guest



PostSubject: Re: How to browse the internet with any decoder at 5MB per second free   10/09/11, 08:50 pm

a friend of mine use the 4669z along side router with a modem with any network of your choice mtn , glo, airtel etisalat etc and you have to subscribe for their data plan before it work.
Back to top Go down
 

How to browse the internet with any decoder at 5MB per second free

View previous topic View next topic Back to top 
Page 3 of 8Go to page : Previous  1, 2, 3, 4, 5, 6, 7, 8  Next
For Installation and supply of satellite equipments, click here to contact any of our agents

Permissions in this forum:You cannot reply to topics in this forum
Naija Talk community (www.9jatc.com) :: Digital World :: Pc Free Browsing Tips-
Ntcguys © 2012 Naija Talk Community. R-Uk Company, Inc. All Rights Reserved.