Naija Talk community

Ghana Lotto Results, F-t-a Satellite Technology, Sport forcast, ICT forum.
 
HomePublicationsFAQSearchMemberlistRegisterUsergroupsLog in

Post new topic   Reply to topicShare | 
Get paid even when you loose in the new 1960bet
Sign up for free Merrybet account
 

 HOW SCALAR RING WORK TO BOOST SIGNAL STRENGHT

View previous topic View next topic Go down 
AuthorMessage
smile2012
Ultimate
Ultimate


Sex : male
Posts : 20755
Location : lag

PostSubject: HOW SCALAR RING WORK TO BOOST SIGNAL STRENGHT   2016-05-31, 12:13

Scalar rings are under "image rejection" when it comes to satellite
signal reception. When the wave, (which looks to the dish like a "s"
or "z"), enters the focal point of the feed, the satellite you want
signals should be the "S" or "Z" wave only located on the inside of
the feedhorns round middle part, which is its' waveguide. The scalar
rings reject any other satellites, or any other signal, of the same
wavelength, or larger wavelength (which in satellite signal terms is
lower or high in freq.) reflected from the middle of the dish, by
absorbing and intercepting these "larger" waves, not allowing them
to enter the middle of the feedhorn where the wanted signals are.
That is about all I can say about the "scalar" rings mounted on a
feedhorn. These other rejected signals can be point-to-point towers
on the same, or lower frequencies, that carry communications to
different areas; or it can be an adjacent satellite signal not rejected
by the dish itself, which if it does not have its' main lobe of signal
within 2 degrees of the wanted satellite, does pick up signal from
the adjacent one. This has to do with both the dishes design (F/D),
and its size (say 7 campared to 10 feet in diameter) which gives
the dish its beamwidth, the amount the main lobe of the dish picks
up in degrees of width, like 2 or 3 or 4 degrees, depending on its
size and design of F/D.

It boost the signal by10-15% and it works Ku and cband...
Back to top Go down
View user profile
fijabi
Amateur
Amateur


Posts : 238
Location : lagos

PostSubject: Re: HOW SCALAR RING WORK TO BOOST SIGNAL STRENGHT   2016-05-31, 13:48

yes is true,i used on my mbc 90cm,it increase 4rm 54% 55% to 57% 58% even when rain wan fall day 84 yestarday d still dey after 9e don go,i'll later try it on my 9e.
Back to top Go down
View user profile
donT72
Enthusiast
Enthusiast


Sex : male
Posts : 1849

PostSubject: Re: HOW SCALAR RING WORK TO BOOST SIGNAL STRENGHT   2016-06-01, 05:35

Good
Back to top Go down
View user profile
tolese
Novice
Novice


Sex : male
Posts : 85
Location : lagos

PostSubject: Re: HOW SCALAR RING WORK TO BOOST SIGNAL STRENGHT   2016-06-01, 07:02

correct
Back to top Go down
View user profile
smile2012
Ultimate
Ultimate


Sex : male
Posts : 20755
Location : lag

PostSubject: Re: HOW SCALAR RING WORK TO BOOST SIGNAL STRENGHT   2016-06-01, 18:52

Use it on all...very powerful device with sekele money

Note My info is real and I would ve put it in practice before uploading

Practice what u will preach
Back to top Go down
View user profile
Sponsored content




PostSubject: Re: HOW SCALAR RING WORK TO BOOST SIGNAL STRENGHT   

Back to top Go down
 
HOW SCALAR RING WORK TO BOOST SIGNAL STRENGHT
View previous topic View next topic Back to top 
Page 1 of 1

Reister on merrybet
Register on WGB

Permissions in this forum:You can reply to topics in this forum
Naija Talk community :: Free To Air Satellite Technology forum-
Post new topic   Reply to topic
Ntcguys © 2012 Naija Talk Community. R-Uk Company, Inc. All Rights Reserved.